Polyvials™ Containers
Technical Information:
Properties and Average Values of BAS Polypropylene:
|
ELECTRICAL
|
SI Metric
|
ASTM Test
|
|
Volume
Resistivity
|
< 1E3 ohm.cm
|
D 257
|
|
Surface
Resistivity
|
< 1E6 ohm/sq
|
D 257 / ESD
STM11.11
|
|
Surface
Resistance
|
< 1E5 ohm
|
ESD STM11.11
|
|
Static Decay
|
< 2.00s
|
FTMS101C / 4046.1- MIL-PRF-81705D, 5kV to 50V, 12% RH
|
|
Volume
Resistivity
|
< 1E3 ohm.cm
|
D 257
|
Regulatory
Compliance Information for BAS Polypropylene
Allergens
The material used to manufacture this product does not contain
any allergens - defined by the FDA as Milk, Eggs, Fish, Crustaceans, Wheat,
Soy, Peanuts, or Tree nuts.
Animal
Derived Content
There are no known sources of Animal Derived Content in the raw
materials used to manufacture this product.
Bisphenol
A
This product does ot contain any 4,4'-Bisphenol A (BPA), CAS #
80-05-7.
CONEG/Heavy
Metals
This product meets the CONEG limitation of 100ppm for the total
incidental context of cadmium, chromium, lead, or mercury. The quantity of
these heavy metals is below the limits given in Annex II (Note) of the Decision
2002/525/EC of June 27th
Epoxy
Derivatives
The material used to manufacture this product does not contain
2,2-bis (4-hydroxyphenyl) propane bis (2,3-epoxypropyl) ether (BADGE), bis
(hydroxyphenyl) methane bis (2,3-epoxypropyl) ethers (BFDGE) or novolac
glycidyl ethers (NOGE).
European
Directive 2003/11/EC
This product conforms to the European Directive 2003/11/EC of
February 2003 amending 76/769/EEC of 27 July 1076. No Polychlorinated Biphenyls
(PCB), Polychlorinated Terphenyls (PCT), Octabromide-diphenyl ethers (Octa DE),
or Decabromo-diphenyl ethers (Deca-BDE) was used in the manufacturing of this
product
Latex
There are no known sources of Latex in the raw materials used to
manufacture this product.
Ozone
Depleting Chemicals (ODC's)
No Class I or Class II ODC's listed in Resolution 1005/2009/EX
were used in the manufacture or formation of this product.
Phthalates
This product does not include the intentional addition of any
phthalate plasticizers, including Benzyl Butyl Phthalate (BBP), CAS #85-68-7,
Dibutyl Phthalate (DBP), CAS #84-74-2, or Di(2-ethylhexyl) Phthalate (DEHP),
CAS #117-81-8. However, the manufacturer of the polypropylene resin used in
this product reports that levels of up to 5 ppm phthalates may occur as
residuals from the catalyst system used to manufacture this polymer.
Revised
RoHS Directive 2011/65/EU
The chemical composition of the polypropylene material used in
the manufacturing of this product is compliant with the Revised RoHS Directive,
2011/65/EU. This material contains less than 0.1% of lead (Pb) or lead
compounds, mercury (Hg) or mercury compounds, hexavalent chromium compounds
(Cr+6), and polybrominated biphenyl (PBB) flame retardants or polybrominated
diphenyl ether (PBDE) flame retardants; and additionally contains less than
0.01% cadmium (Cd) or cadmium compounds.
REACH
SVHC
This product does not contain any of the 163 chemicals held to
be Substances of Very High Concern (SVHC's) as defined by the European REACH
Program. Incidental amounts of any of these chemicals occurring as impurities,
if present, would be below the 0.1% threshold.
SHELF
LIFE
While the shelf life of products manufactured with thermoplastic
composites is indefinite if stored in stable environments, the shelf-life of
our products can be extended by storing the products at room temperature, out
of sunlight, and in a dry environment. If you have any shelf-life or storage
related questions, please contact us.
